Ubiquiti UniFi SmartPower Redundant Power System

Product Information

The Ubiquiti UniFi USP-RPS is a smartpower redundant power system, designed to protect up to 6 x UniFi SmartPower supported devices from sudden power supply module failure.

For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility Specifications The Ubiquiti UniFi USW Pro 24-POE is a configurable, Gigabit Layer 2 and Layer 3 switch with auto-sensing 802.3at PoE+ and 802.3bt PoE++.This DC input provides redundant power when the UniFi Switch is connected to the UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included). If there is an AC power loss or internal power supply failure, the UniFi Switch will draw power from the USP-RPS instead.

The USP-RPS was created to ensure stable operation of Ubiquiti Networks devices regardless of possible problems with sudden power failure. It supports up to six devices with the UniFi SmartPower standard, including PoE switches USW Pro. A key feature of the system is the continuous monitoring of each connected network device. This is done thanks to the USP cable system, which is - in case of failure of the internal AC/DC power supply - an additional power source for the device in addition to the standard one. It is worth noting that the USP-RPS ensures automatic power supply restoration, thanks to which the network should operate without any interruption to the supply of communications. Control and management of the equipment is possible thanks to unified UniFi Network Controller software, while the status of individual elements or adaptation status can be read thanks to physical LEDs on the device and a small touch screen. UniFi SmartPower technology optimizes your network to maximize uptime and resiliency through advanced power redundancy and distribution units. Uninterruptible Power and Redundancy We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcableConnect the included USP Cable to a UniFi device with a USP Connect DC input. (Additional USP cables are sold separately as model USP-Cable.)

You may choose to restrict the collection or use of your personal information in the following ways: We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the display indicates that the device has reset itself. After a few seconds, the LED will turn off, and the device will automatically reboot. Some UniFi devices have a proprietary USP port that allows them to be connected using a Ubiquiti USP-Cable (sold separately).

Uninterruptible Power and Redundancy

The USP-RPS will continuously monitor all attached devices, in case of an internal AC/DC power supply failure. The USP-RPS fail-over is automatic, so your network continues to operate with no interruption in service. Note: Although the cabling can be located outdoors, the USP-RPS itself should be housed inside a protective enclosure.

PoE+ and eight PoE++ RJ45 ethernet ports have total 400W PoE budget, and two SFP+ ports offer 10Gbps uplink options. Near-silent cooling and a 1.3" touch LCM. Enheden har integreret 1,3tm farve touchscreen LCM, der viser systeminformation til praktisk overvågning. USP-RPS overvåger løbende alle tilsluttede enheder. I tilfælde af intern AC / DC-strømforsyningsfejl er failover automatisk, så dit netværk fortsætter med at fungere uden afbrydelse i service.For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.